Do you wish to put in a photo for your quilt that looked much more like section of the fabric than an iron-on decal?
In past times, we relied on photo transfer paper to iron our photo onto our quilt block. Have you ever heard about direct-to-garment printing? It’s an incredible new method to get your favorite photo from your scrapbook and on to your quilt block.
Direct-to-garment (DTG) printing is a type of digital printing. With a price of about $20,000, it’s not practical to run out and get your own personal DTG printer. The common price for coffee printer is $8 to $10.
This process is a little more costly than the traditional photo transfer method. That’s partially as the technology is very new. If you opt to try out a DTG photo on your memory quilt block, there are a few things to look for when deciding on the printer who can perform the be right for you:
1. Make sure you can find no chemicals required to pre-treat your fabric first. Some DTG printers create an image which is similar to screen printing. You don’t want that seem to be or feel in your quilt. The ink is going to be hard along with the fabric and definately will eventually (sometimes much sooner than later) will start to crack and wear with washings. Ask your prospective printer to find out a sample of something they’ve printed. When you can experience the ink is raised on top of the surface in any respect by any means, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.
2. Use a kind of digital DTG printing provided by the Brother GT 541. There are no chemicals necessary to pre-treat the material. The inks bond with all the natural fibers and therefore are heat cured to set the graphic. The inks are water based, which helps leave a soft yet crisp image on your fabric.
There are several downfalls to using led uv printer on the quilt blocks. One pitfall is color limitations. Since DTG printing is really a form an electronic digital printing, there is no white ink. White is the lack of color. Consequently you are unable to print a picture on navy blue or black fabric.
Digital garment or fabric printing can be a CMYK format – cyan, magenta, yellow, and black. You may mix those colors to get a full spectrum of accurate colors – simply not white. You will find DTG printers that print white ink, but many of those require chemical pre-treatment of the fabric and definately will give you that thick surface print.
You should work with a light colored or neutral fabric and it must be cotton or perhaps a cotton blend. The fabric must have the ability to withstand 350 degrees for around thirty seconds. Should you be not 09dexypky with one hundred percent cotton or possibly a 50/50 blend, ask your printer if the fabric will work.
Measurements of your print may be a limitation. Most DTG printers have a printing field approximately 14 inches x 16 inches. For many quilters, that size range won’t be considered a problem.
And talking about printing fields, here’s a hint. Most direct to garment printer charge to get a 14×16 surface. Should your blocks will permit 2 or 3 photos to put within that range, you can get them all printed for the price of one. Seek advice from the printer to find out if it’s possible along with your particular project.
Like the majority of technological advances, the price of digital garment (or fabric) printing will most likely decrease as time passes. Maybe it is going to also be available on smaller printers for home and personal use. Until then, try to get a DTG printer for your next photo quilt project. The outcome may be like custom fabric, that is to be a great touch for your personal extraordinary quilt!